Elevator Equipments Conveyor No Contact Belt Deviation Sway Sensor Switch

• Type: Belt Sway Switch
• Principle: Pyroelectric
• Wires: 3 Wires
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: JPNS-II-G
• Standard: Standard
• Application: Industrial Automation
• IP Grade: IP66
• Output Signal: Switch Signal
• Resetting Mode: Automatic Resetting
• Transport Package: Carton Cushioning Packing
• Specification: Standard
• Origin: China

Product Description

Technique Parameters:

Working Voltages:220VAC±15%	Load Current:≤5A
Insulation rResistance:>500MΩ	Output Singal:Switch Singal
Environment temperature:-20ºC~+60ºC	Environment Humidity:<90%
Weight :2Kg	IP Grade:IP66
Resetting Mode: Automatic Resetting	Responsive Time:<2mS
Control Contact Capacity:250V/5A	Force :50±10N

Installation Diagram

Installation Size Diagram

Introduction
No contact belt sway switch is mainly used in the instant data monitoring of the long distance working condition of the long distance belt transportation machine. It adopts the on sight(RS845bus) to realize the long distance alarming function. It is highly time effectiveness.It can effectively protect the equipment and people's safety and avoid the extension of the accident to ensure the production, and protect the equipment. Also the signal can reach the controlling system to realize the factory automatic control. So to reach the purpose of reduce the employee and increase the efficiency. Concentrating the controlling and make benefit to the production and arranging.

Application
The machine can be widely used in belt transportation used industries like Steel, Power Station, Chemicals, Cement, Coal, Metallurgy, Mining, Port, Grain Warehouse, etc.

Working principle
This no contact sway belt switch is installed on the both sides of the walls of the elevators.when we installit, we should pay attention that the distance between damper and belt should be set over the safety distance(the distance can be adjusted,it is determined by the user and it is based on the rational sway scope of the carft documents agreement).
when the belt goes outward, it will fricted on the damper and the damper will be sent to the adjustment bar, the bar will take action on the senor and the sensor will give out the alamring signals.

Product Display